รายการสินค้า

สมัครรับจดหมายข่าว

Matronic
Optone SFP+-10GB-SR 10G,850nm 0.3km Maximize

Optone SFP+-10GB-SR 10G,850nm 0.3km

·Hot-pluggable SFP+ footprint 
·Supports 9.95 to 10.3 Gb/s bitrates*
·Power dissipation < 1W
·RoHS-6 compliant (lead-free)
·Commercial temperature rang 0°C to 70°C
·Single 3.3Vpower supply
·Maximum link length of 300m on 2000 MHZ-km MMF
·Uncooled 850nm VCSEL laser
·Receiver limiting electrical interface
·Duplex LC connector
·Built-in digital diagnostic functions

รับประกัน 1 ปั

รายละเอียดเพิ่มเติม

12 Items in stock

4,900.00 ฿

1 ผลิตภัณฑ์อื่น ๆ ในประเภทเดียวกัน :

APPLICATIONS
·10GBASE-SR/SW 10G Ethernet

OPTONE’s SFP+10GB-SR 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit
Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE
802.3ae 10GBASE-SR/SW Digital diagnostics functions are available via a 2wire serial interface, as specified in SFF-8472

PRODUCT SELECTION
I. Pin Descriptions
Pin Symbol Name/Description Ref.
1 VEET Transmitter Ground (Common with Receiver Ground) 1
2 TFAULT Transmitter Fault. 2
3 TDIS Transmitter Disable. Laser output disabled on high or open. 3
4 SDA 2-wire Serial Interface Data Line 4
5 SCL 2-wire Serial Interface Clock Line 4
6 MOD_ABS Module Absent. Grounded within the module 4
7 RS0 No connection required
8 RX_LOS Loss of Signal indication. Logic 0 indicates normal operation. 5
9 RS1 No connection required
10 VEER Receiver Ground (Common with Transmitter Ground) 1
11 VEER Receiver Ground (Common with Transmitter Ground) 1
12 RD- Receiver Inverted DATA out. AC Coupled
13 RD+ Receiver Non-inverted DATA out. AC Coupled
14 VEER Receiver Ground (Common with Transmitter Ground) 1
15 VCCR Receiver Power Supply
16 VCCT Transmitter Power Supply
17 VEET Transmitter Ground (Common with Receiver Ground) 1
18 TD+ Transmitter Non-Inverted DATA in. AC Coupled.
19 TD- Transmitter Inverted DATA in. AC Coupled.
20 VEET Transmitter Ground (Common with Receiver Ground) 1


Notes:
1. Circuit ground is internally isolated from chassis ground.
2. Tfault is an open collector/drain output, which should be pulled up with a 4.7k – 10k Ohms resistor on the host
board if intended for use. Pull up voltage should be between 2.0V to Vcc + 0.3V. A high output indicates a
transmitter fault caused by either the TX bias current or the TX output power exceeding the preset alarm thresholds.
A low output indicates normal operation. In the low state, the output is pulled to <0.8V.
3. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
4. Should be pulled up with 4.7kΩ – 10kΩon host board to a voltage between 2.0V and 3.6V.
MOD_ABS pulls line low to indicate module is plugged in.
5. LOS is open collector output. Should be pulled up with 4.7kΩ – 10kΩon host board to a voltage between 2.0V and
    3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.

 

Product line :

Model Rate Wavelength Distance Optical power Sensitivity Other
SFP+10GB-SR
10G 850nm 300m -7.3~-1dbm -11dbm SR/SW    ROHS
SFP+10GB-LR
10G 1310nm 10km -8.2~-0.5dbm -13dbm LR/LW
SFP+10GB-ER
10G 1550nmDFB 40km -5~+4.5dbm -16dbm LR/LW
SFP+-10GB-ZR
10G 1550nmDFB 80km 0~+4.5dbm -23dbm ROHS
SFP+ BIDI-13-10D
10G 1330nm 10km -6~-14dbm <-15dbm 10G BIDI
SFP+ BIDI-12-10D
10G 1270nm 10km -6~-14dbm <-15dbm 10G BIDI
SFP+ CWDM-XX-40D
10G 1470~1610nm 40km 4~-1dbm <-15.5dbm 10G CWDM
SFP+ CWDM-XX-80D
10G 1470~1610nm 80km 5~0dbm <-23dbm 10G CWDM
SFP+ DWDM-XXXX-40D
10G 17~61nm 40km 4~-1dbm <-15.5dbm 10G DWDM
SFP+ DWDM-XXXX-80D
10G 17~61nm 80km 5~0dbm <-23dbm 10G DWDM



ไม่มีความคิดเห็น

Write your review

Optone SFP+-10GB-SR 10G,850nm 0.3km

Optone SFP+-10GB-SR 10G,850nm 0.3km

·Hot-pluggable SFP+ footprint 
·Supports 9.95 to 10.3 Gb/s bitrates*
·Power dissipation < 1W
·RoHS-6 compliant (lead-free)
·Commercial temperature rang 0°C to 70°C
·Single 3.3Vpower supply
·Maximum link length of 300m on 2000 MHZ-km MMF
·Uncooled 850nm VCSEL laser
·Receiver limiting electrical interface
·Duplex LC connector
·Built-in digital diagnostic functions

รับประกัน 1 ปั

Write your review

ติดต่อเรา

Our hotline is available 24/7

โทรศัพท์:(66+)2-372-2327-8

Contact our hotline